XLPE shielded outdoor armored cable
Single core 35mm armored cable
Single-core 35mm armored cable is a component that fixes one or
more XLPE insulated electrical conductors with ordinary PVC
sheaths. This component is used to transmit low-voltage electric
power. LV XLPE XLPE power cables can be set up as permanent
circuits in buildings, buried underground, overhead or bare.
Physical and Electrical Characteristics
| No.cores x | Insulation | Sheath | Outer Ø | weight | Current ratings in air 30℃ | Current ratings buried 20℃ |
| cross-sec. | thickness | thickness | approx. | approx. |
| Nominal |
| Phase | Neutral | value |
| mm² | mm | mm | mm | mm | kg / km | A | A |
| 3×4+1×2.5 | 0.7 | 0.7 | 1.8 | 12.7 | 277 | 37 | 47 |
| 3×6+1×4 | 0.7 | 0.7 | 1.8 | 13.9 | 363 | 47 | 60 |
| 3×10+1×6 | 0.7 | 0.7 | 1.8 | 16.1 | 527 | 64 | 81 |
| 3×16+1×10 | 0.7 | 0.7 | 1.8 | 18.6 | 766 | 85 | 106 |
| 3×25+1×16 | 0.9 | 0.7 | 1.8 | 22.2 | 1140 | 113 | 137 |
| 3×35+1×16 | 0.9 | 0.7 | 1.8 | 24.6 | 1475 | 139 | 164 |
Application
XLPE insulated power cables are used as power transmission lines.
The general conditions are as follows:
Mainly used to transmit power or as a control cable.
The general working temperature in wet or dry environment is as
high as 90°C (130°C emergency and 250°C short circuit).
The voltage rate is 600/1Kv.
Suitable for overhead (air) installations, main power lines or
auxiliary power lines buried in the ground or in dust.
Cable ducts, cable trays, cable ladders, in tunnels or conduits,
and in switch cabinets and other complex operating environments.
When it is necessary to isolate electromagnetic effects,
anti-interference, anti-interference and increase strength, it can
work perfectly after metal sheath (metal, especially aluminum
cladding) or metal wire armor (especially steel wire armor-SWA).
Feature of product
Excellent electrical and physical properties-less electrical
transmission loss and energy saving.
The ability to carry large current-higher operating temperature.
Higher strength and stability-resistance to thermal deformation,
stress cracking and thermal aging.
Easy to install-no line layout restrictions, no terrain or height
restrictions.
Maintenance-free-up to 60 years of service life.
Our advantage
Only use high-quality XLPE insulation materials.
Mass production provides you with competitive prices.
Free samples and OEM are provided.
Standard
0.6/1KV XLPE insulated power cable meets or exceeds the following
specifications:
IEC 60332-1 is a test for electrical and optical cables under fire
conditions.
IEC 60502-1 insulated and extruded power cables and accessories,
rated voltages of 1 kV and 3 kV.
IEC 60754 tests the gas generated during the combustion of cable
materials.
IEC 61034 is a measurement of the smoke density of a burning cable
under specified conditions.
BS 7870-3 low and medium voltage polymer insulated cables for power
distribution and power generation.
DIN VDE0276-603 Power Cables-Part 603: Distribution cables with a
rated voltage of 0.6 / 1 kV.
ANSI/NEMA WC 70-2009/ICEAS-95-658 A power cable with a rated power
of 2000 volts or less, used to distribute electrical energy.
AS/NZS 4026: 2008 Cable-Standards Australia for underground
residential power distribution system.
AS/NZS 4961: 2003 cables-polymer insulation-used in power
distribution and service applications.
AS/NZS 5000.1: 2005 cable-polymer insulation-suitable for working
voltages of 0.6/1 (1.2) kV and below.
Other equivalent standards for PVC insulated power cables.
